Grabber Wafer Framing Screws - Fine Thread - Clear Zinc
Grabber Wafer Framing Screws - Fine Thread - Clear Zinc - 8 x 9/16" / 5 lb Pack (Approx. 1,145 Pcs.) is backordered and will ship as soon as it is back in stock.
Pickup available at CSR Building Supplies (Barrie, ON)
Usually ready in 24 hours
Used for light gauge metal applications where low profile head exposure is desired. Super sharp 23° Streaker® point means quick and easy penetration into metal (25-20 ga.), while wafer head provides greater bearing surface. The right screw for K-lath installation.
Specifications
- Gauge: #8
- Head Type: Wafer framing
- Recess Type: #2 Phillips
- Thread Type: Twin lead
- Coating: Gray phosphate
Installation Guidelines
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The wafer head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.