Our Barrie Location is open on Saturdays! 7am to 12pm.

New bundle sets have arrived! Shop now

Boxing Week Sale

Save up to 34% on your favourite items.

1 2

CSR Drywall Adhesive Foam (25 oz.)

CSR  |  SKU : 08CSRDWADHESIVE  |  Code-barres: 628942278233
$1380 CAD
Frais de livraison calculés lors du paiement.
Package Quantity

Earn [points_amount] when you buy this item.

 

CSR Drywall Adhesive PU Foam is a one component aerosol polyethylene adhesive foam that cures swiftly with moisture and provides fast and powerful adhesion for various construction materials. Highly recommended for heat insulation systems.  

 

Properties:  

  • Powerful adhesion of drywall and polystyrene heat panels (XPS and EPS)
  • Instant adhesion and wall plugging within two hours
  • More economical, ready to use an aerosol can minimum
  • 14m² heat insulation panel adhesion for each can
  • Minimum expansion during drying period 
  • No further expansion and shrinkage after dry
  • Lighter material compared to plaster alternative material used in heat insulation systems
  • Removes excess weight
  • High yield up to 55 liters, depending on the humidity and temperature
  • Usable at low temperature like 0°C
  • Does not contain propellant gases which are harmful to the ozone layer 

 

Applications: 

  • Mounting drywall, heat insulation panels and filling voids during adhesive application
  • Advised for wooden type construction materials, concrete, metal, etc.
  • Mounting and isolation for frames of windows and doors 

 

Instructions: 

  • Optimal can temperature is +20°C
  • Application temperatures between 0°C and +30°C
  • Shake the can well before screwing onto an applicator gun
  • Output of the foam can be regulated with the trigger and controlled with the adjustment screw on the backside of the gun
  • Always keep the can upside down during application
  • Fresh foam can be cleaned by CSR cured foam or mechanically 

 

Restrictions: 

  • Storage above 30°C and below 5°C shortens shelf life
  • Store and transport in vertical position
  • Keep in room temperature for at least 12 hours before the application
  • Cured foam will discolor if exposed to ultraviolet light
  • Paint or coat cured foam for the best results
  • In outdoor applications, dried foam can be wiped away by mechanical force
  • Lower temperatures decrease yield and curing time 

 

Safety: 

  • Contains isocyanic acid, polymethylenapolyphanylene ester
  • H222 Extremely flammable aerosol
  • H229 Pressurized container
  • H332 Harmful if inhaled
  • H373 May cause damage to organs through prolonged or repeated exposure
  • H319 Causes serious eye irritation
  • H315 Causes skin irritation
  • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
  • H317 May cause an allergic skin reaction
  • P280 Wear protective gloves, protective clothing, and eye and face protection
  • PS284 In case of inadequate ventilation, wear respiratory protection  
  • P501 Dispose of in an approved waste disposal plant; contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation