Grabber Cement Board and High Density Sheathing Screws have been specifically designed for use with Cement board and High density exterior sheathing. These exterior grade GrabberGard corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.
Grabber Cement Board Screws meet the USG Durock specification for minimum head diameter of 0.400”.
Specifications
- Gauge: #8
- Head Type: Flat wafer with counter sinking nibs
- Head Diameter: .40 inch
- Recess Type: #2 Phillips
- Thread Type: Single lead
- Point: Drill point
- Coating: GrabberGard® superior corrosion protection.
Installation Guidelines
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 4000 RPM.
- Install with head flush with board, not need to counter sink.
- Overdriving may result in failure of the fastener or strip out of the
- work surface.
GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.
Technical Data
Safety Data Sheet
