Drywall Tapes

Drywall or joint tape is what covers seams and, with joint compound, bonds drywall sheets together. But are all drywall tapes the same? When choosing drywall tape you have the option of metal, paper, and fiberglass mesh available to you. Let’s look at the details:

CGC Paper Drywall Tape


Paper tape is applied over a thin amount of any type of joint compound. Push any air bubbles out with a putty knife as you press the tape onto the joint compound. The nature of the paper does not allow for much flexibility; this is an asset when taping corners and butt joints because the non-flexibility means more security. The down side of paper material is that it is susceptible to moisture and mold - so it’s best to avoid areas with a lot of moisture like a bathroom or basement.


  • Use with any joint compound
  • Non-flexible: great for corners and butt joints
  • Susceptible to moisture: not ideal in bathrooms and basements
  • Additional steps of a first coat of joint compound, and of squeezing out air bubbles

Use for: dry rooms, corners, and butt joints.

FibaFuse 2 1/16" MAX Reinforced Drywall Tape


Fiberglass mesh tape is self-adhesive and can be applied to drywall without a first coat of joint compound. It holds up to moisture and resists mold. Mesh tape lays flat so you won’t have to worry about air bubbles. While the fiberglass itself is strong, its flexibility means that joints will be less secure; this is not a problem when fixing patches and joint strength isn’t top priority, but it might eventually cause problems with cracks.


  • Self-adhesive and time saving
  • Resists moisture and mold
  • Strong but flexible: might cause cracks and less secure than paper but good for patches

Use for: bathrooms, basements, and patches.

Sure Corner Roll-on Bead


This is a steel-reinforced paper tape. Metal strips on either side of the middle make it easy to fold and fit perfectly into corners. The tricky part comes to feathering it out as this tape can be challenging to hide. Use snips for cutting.


  • Folds and fits easily into corners
  • Harder to feather out
  • Cut length with snips

Use for: inside and outside corners.

Knowing now what these 3 types of drywall type are best suited for, what combination will you try for your next project? 

Share your work with the CSR Community and tag us on social media!

Have a question? We’re here to help!


Call us Monday to Friday between 6 AM and 4 PM at (905) 761-5611

Email us anytime at info@csrbuilding.ca

Follow and share your work with us on FacebookInstagram, and TikTok!








Leave a comment

All comments are moderated before being published