Holiday hours in effect. Closed Tuesday December 24th to Thursday December 26th View our store hours.

Our Barrie Location is open on Saturdays! 7am to 12pm.

Orders placed after Monday December 23rd (12pm EST) will be shipped after Thursday December 26th. 

Boxing Week Sale

Save up to 34% on your favourite items.

1 2

CSR Drywall Adhesive Foam 750 ml (25 oz.)

CSR  |  SKU: 08CSRDWADHESIVE  |  Barcode: 628942278233
$1380 CAD
Shipping calculated at checkout.
Package Quantity

Earn [points_amount] when you buy this item.

CSR Drywall Adhesive PU Foam is a one component aerosol polyethylene adhesive foam that cures swiftly with moisture and provides fast and powerful adhesion for various construction materials. Highly recommended for heat insulation systems.  

Properties

  • Powerful adhesion of drywall and polystyrene heat panels (XPS and EPS)
  • Instant adhesion and wall plugging within two hours
  • More economical, ready to use an aerosol can minimum
  • 14m² heat insulation panel adhesion for each can
  • Minimum expansion during drying period 
  • No further expansion and shrinkage after dry
  • Lighter material compared to plaster alternative material used in heat insulation systems
  • Removes excess weight
  • High yield up to 55 liters, depending on the humidity and temperature
  • Usable at low temperature like 0°C
  • Does not contain propellant gases which are harmful to the ozone layer 

Applications

  • Mounting drywall, heat insulation panels and filling voids during adhesive application
  • Advised for wooden type construction materials, concrete, metal, etc.
  • Mounting and isolation for frames of windows and doors 

Instructions 

  • Optimal can temperature is +20°C
  • Application temperatures between 0°C and +30°C
  • Shake the can well before screwing onto an applicator gun
  • Output of the foam can be regulated with the trigger and controlled with the adjustment screw on the backside of the gun
  • Always keep the can upside down during application
  • Fresh foam can be cleaned by CSR cured foam or mechanically 

Restrictions

  • Storage above 30°C and below 5°C shortens shelf life
  • Store and transport in vertical position
  • Keep in room temperature for at least 12 hours before the application
  • Cured foam will discolor if exposed to ultraviolet light
  • Paint or coat cured foam for the best results
  • In outdoor applications, dried foam can be wiped away by mechanical force
  • Lower temperatures decrease yield and curing time 

Safety

  • Contains isocyanic acid, polymethylenapolyphanylene ester
  • H222 Extremely flammable aerosol
  • H229 Pressurized container
  • H332 Harmful if inhaled
  • H373 May cause damage to organs through prolonged or repeated exposure
  • H319 Causes serious eye irritation
  • H315 Causes skin irritation
  • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
  • H317 May cause an allergic skin reaction
  • P280 Wear protective gloves, protective clothing, and eye and face protection
  • PS284 In case of inadequate ventilation, wear respiratory protection  
  • P501 Dispose of in an approved waste disposal plant; contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation