Liagle Tape In Mud
Liagle Tape In Mud est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
- Tape in Mud™ is a combination of polyacrylonitrile fibre, polyester fibre and cellulose wood fibres in various lengths And diameters.
- Tape in Mud™ is a fibre reinforcement additive to drywall taping compound. It turns regular taping mud into tapeless joint compound.
- When fibres mix with regular drywall joint compound at the best ratio, fibres cross link to each other and form a 3D structural mat like a dryer sheet in the mud. It serves like a fibre mat tape in the mud. That’s how liagle tapeless drywall finishing- tape in mud™ Works.
- apply the fiber reinforced joint compound directly to the joints without embedding any drywall tapes.
- Pre-fill, tape installation, and a filling process can be done by just one coat of Tapeless drywall joint compound.
- Joint compound with Tape in Mud™ mixed in it has higher bonding and tensile strength, lower shrinkage, no plastic shrinkage cracks, and drys faster.
- The joints are welded by tapeless mud, much stronger than drywall itself and have higher flexibility.
- It can save about 40% of labor time.
Mixing Directions
Mixing with premixed joint compound:
- Put 1 box of 17 Liters premixed joint compound in a 5 gallon bucket. Add 2 bags of Tape In Mud™ to the bucket, for the first coat of mudding.
- Mix only One bag of Tape In Mud™ with 1 box of 17 litres premixed joint compound for second coat.
- Adding water gradually while mixing.
Mixing with setting compound powder:
- Put 1 bag ( 8-12 kg) of the setting-type compound in a clean and dry 5 gallon pail.
- Put 1 bag Tape In Mud™ in the bucket, mix with paddle and drill for 5 minutes.
- Make sure the fibres are dispersed uniformly in the powder.