Grabber 8 X 1/2" SuperDrive Mach I Collated Truss Head Drill Point Fine Thread

Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal.

Specifications

• Application: Metal to Metal
• Gauge: #8
• Length: 1/2"
• Head Type: Reduced Modified Truss Head
• Bit Tip: Phillips Bit Tip
• Thread Type: Fine Thread
• Coating: Clear Zinc
• Point Type: Drill Point

Benefits

• Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
• The Reduced Modified Truss Head provides a sufficient load bearing surface for better holding power, but is small enough to fit into tight areas.
• Grabber reduced modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
• Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. 

Installation Guide

• Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
• The head is fully seated when the bearing surface of the head is flush with the work surface.
• Overdriving may result in failure of the fastener.

Safety Sheet Effective September 2019 - August 2024