1
of
2
Loading...
CSR Drywall Adhesive Foam 750 ml (25 oz.)
CSR | SKU:
08CSRDWADHESIVE
Sold out
Sold out
€995 EUR
Unit price
/
Unavailable
Shipping calculated at checkout.
CSR Drywall Adhesive Foam 750 ml (25 oz.) - Single Can is backordered and will ship as soon as it is back in stock.
Earn [points_amount] when you buy this item.
Couldn't load pickup availability
CSR Drywall Adhesive PU Foam is a one component aerosol polyethylene adhesive foam that cures swiftly with moisture and provides fast and powerful adhesion for various construction materials. Highly recommended for heat insulation systems.
Properties
- Powerful adhesion of drywall and polystyrene heat panels (XPS and EPS)
- Instant adhesion and wall plugging within two hours
- More economical, ready to use an aerosol can minimum
- 14m² heat insulation panel adhesion for each can
- Minimum expansion during drying period
- No further expansion and shrinkage after dry
- Lighter material compared to plaster alternative material used in heat insulation systems
- Removes excess weight
- High yield up to 55 liters, depending on the humidity and temperature
- Usable at low temperature like 0°C
- Does not contain propellant gases which are harmful to the ozone layer
Applications
- Mounting drywall, heat insulation panels and filling voids during adhesive application
- Advised for wooden type construction materials, concrete, metal, etc.
- Mounting and isolation for frames of windows and doors
Instructions
- Optimal can temperature is +20°C
- Application temperatures between 0°C and +30°C
- Shake the can well before screwing onto an applicator gun
- Output of the foam can be regulated with the trigger and controlled with the adjustment screw on the backside of the gun
- Always keep the can upside down during application
- Fresh foam can be cleaned by CSR cured foam or mechanically
Restrictions
- Storage above 30°C and below 5°C shortens shelf life
- Store and transport in vertical position
- Keep in room temperature for at least 12 hours before the application
- Cured foam will discolor if exposed to ultraviolet light
- Paint or coat cured foam for the best results
- In outdoor applications, dried foam can be wiped away by mechanical force
- Lower temperatures decrease yield and curing time
Safety
- Contains isocyanic acid, polymethylenapolyphanylene ester
- H222 Extremely flammable aerosol
- H229 Pressurized container
- H332 Harmful if inhaled
- H373 May cause damage to organs through prolonged or repeated exposure
- H319 Causes serious eye irritation
- H315 Causes skin irritation
- H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H317 May cause an allergic skin reaction
- P280 Wear protective gloves, protective clothing, and eye and face protection
- PS284 In case of inadequate ventilation, wear respiratory protection
- P501 Dispose of in an approved waste disposal plant; contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation
