NorthStar™ Fully Anodized High-Top™ Loading Pump

Fully Anodized!

Features

• Ergonomically designed to fill boxes and automatic tapers without bending over, reducing wear and tear on your lower back
• Low center of gravity makes this the most lightweight and stable tall pump available
• Standard pump barrel means it won't take 1/3 of a bucket of joint compound to prime the pump, also making it easier to clean that the tall barrel models

Also includes these standard NorthStar pump features:

• Now US sized to be comaptible with all goosenecks
• New updated polyurethane piston seal for improved suction
• Removable foot valve for easy cleaning and screen replacement.
• Quick release removable barrel for easy cleaning;
• Barrel is a one piece CNC machined (barrel and collar);
• New Billet aluminum leg (anodized and laser marked) with stainless steel chain holder;
• Constructed from stainless steel and high quality alloy components for a longer life;
• Filter screen at base to prevent contamination of compound;

Operation

The pump is used to fill the automatic taper, flat boxes, and corner boxes. The gooseneck is used to fill the automatic taper and a filler nozzle attachment is used for filling of the flat boxes and corner box. Constructed of stainless steel and alloy products and has a “Quick Release” for easy cleaning.

1. Remove the pump from the bucket and clean off the exterior of the pump;
2. Disconnect the filler valve/gooseneck and thoroughly flush out with clean water;
3. Unlatch the tabs holding the barrel and remove the barrel;
4. Pull pin holding foot valve and screen and flush with water and brush;
5. Clean out the interior of the barrel and the piston of the pump with water and a brush or hose;
6. The screen, gasket and O-ring should be checked periodically and replaced when worn;
7. Lubricate with a non-penetrating oil and replace the barrel and re-engage draw latches;
8. Replace foot valve and screen and reattach with pin.