CSR Multi Foam (25 oz.)

CSR Multi-Purpose PU Gun Foam is a single component PU foam used with an application gun and features higher yield, easier application and reusability.  

Properties:  

• Excellent adhesion and filling capacity 
• High thermal and acoustical insulation value  
• Cured Foam is mold-proof, waterproof and can be sanded and painted  

Applications:

• Filling and sealing of gaps, joints and cavities 
• Insulating basements, attics, outdoor faucets, etc.   

Instructions:

• Wear protection to avoid all contact with skin and eyes 
• Shake well for 30 to 45 seconds  Remove all sources of ignition until tack free (takes approx. 10 min) 
• Application range is between temperatures 28.4°F (5°C) and 86°F (30°C) 
• Fill gaps partially as foam will expand  
• Do not overfill  
• Moisturizing the surface before and after the application accelerates curing rate  
• Attach can to the applicator gun safely; do not over tighten  
• Dispense foam with can upside down  
• Cured foam can be trimmed in 30-45 minutes, sanded and painted 
• Applications under low temperatures would decrease efficiency and increase curing times  
• Storage shelf life may be decreased if stored above 77°F (25°C) and below 41°F (5°C)  
• Products must be carried and stored vertical  
• Protect from sunlight  
• Do not expose to temperatures exceeding 122°F (50°C)  
• VOC (g/L) according to ASTM D2369-10 is < 2 g/L  
• By percentage according to ASTM D2369-10% is <6  

Clean Up:  

• Foam may be cleaned by using CSR Foam Cleaner  

Safety:  

• Contains isocyanic acid, polymethylenapolyphanylene ester 
• H222 Extremely flammable aerosol  
• H229 Pressurized container  
• H332 Harmful if inhaled  
• H373 May cause damage to organs through prolonged or repeated exposure  
• H319 Causes serious eye irritation  
• H315 Causes skin irritation  
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled  
• H317 May cause an allergic skin reaction  
• P280 Wear protective gloves, protective clothing, and eye and face protection  
• PS284 In case of inadequate ventilation, wear respiratory protection   
• P501 Dispose of in an approved waste disposal plant; contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation